Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. C Hr
  6. : How do you replace the battery of the Toyota C-HR remote control?

Toyota C Hr - Video tutorial

Model: Toyota C Hr Ax50, Ax10, MK 1 - Years 2016-2023
Part: Key
Operation: How do you replace the battery of the Toyota C-HR remote control?

In order to replace the battery of the Toyota C-HR remote control, you need to remove the key from the top of the device so that it is completely removed from its slot. Once the key has been removed, you can leverage inside its housing to open the remote control. After the key has been opened, you can remove the battery inside so that it can be replaced with a new one. Once the new battery has been inserted, you can close the remote control and reinsert the key.


Posted on 24 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Toyota C Hr 2016-2023 - How to replace the key battery of a Toyota C-HR? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos