|
Do it yourself
| |||
| ||||
Where is the Auxiliary Battery Located on a Toyota Rav4?
Model: Toyota Rav 4
MK 4, Xa40
- Years 2013-2018
In this video, we will see where the auxiliary battery of the Toyota Rav4 is located and how to jump-start it in case of an emergency. Under the bonnet, this vehicle is somewhat different from most others. Here, you will not find the 12-volt starter battery, which is located in the boot next to the spare wheel. If the vehicle does not start, you can jump-start it using auxiliary cables with the help of a second vehicle. Here’s how. Open the fuse box at the front of the bonnet, lift the cover of the red emergency starter terminal, and connect the positive red jump lead to this terminal. Now connect the auxiliary cables to the second vehicle, placing the red cable on the positive terminal and the black cable on the negative terminal. On the Rav4, the black cable must be connected to a solid, fixed, unpainted metal point, away from the emergency starter terminal. Start the second vehicle, increasing the revs and maintaining this level for five minutes to charge the Rav4's auxiliary battery. Then, with your foot on the brake, press the Rav4's button to start it; once it is running, you can remove the cables in the reverse order of connection. Remember to have the vehicle checked at an authorised workshop.
Updated on 9 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Rav 4
(1994-2000 /
MK 1, Xa10)
Today we will see the necessary instructions to remove and replace the timing belt on the first series Toyota Rav4. First, open the bonnet of your ca…
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
In the Toyota RAV4, the fuses are distributed in several locations throughout the vehicle. The first block is located in the cabin, at the lower part…
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
You can replace the remote battery on the Toyota RAV4 by pressing the button on the key that is located at the top of the remote: this will lift the …
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.193
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |