Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Verso
    4. : Where are the fuses located in the Toyota Verso?

Toyota Verso - Video tutorial

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Fuse box
Operation: Where are the fuses located in the Toyota Verso?

Any fuse of the Toyota Verso is located inside one of the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, it will be possible to find two boxes for containing the fuses. The first one will be located in the lower left part of the dashboard, relative to the steering column: this one contains the fuses for the horn, the radio, the instrument panel, etc. The second box is instead located on the right side of the engine compartment: it contains the fuses that regulate the operation of the headlights, the windshield wipers, etc.


Posted on 6 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Verso 2009-2018 - Where are the fuses of the Toyota Verso? Read Answer
    • Verso 2009-2018 - Where are the fuse boxes located on the Toyota Verso? Read Answer
    • Verso 2009-2018 - What is the cigarette lighter fuse on Toyota Verso? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos