Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in the Toyota Corolla?

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you will see how to replace the fuel pump in the Toyota Corolla, a very simple and quick operation. First, open the bonnet, then disconnect the negative terminal of the battery to work safely.

Next, open the rear doors, lift the seat base, and remove the large central cap. At this point, you can disconnect both the fuel hoses and the power connector, unscrew the fixing bolts with a socket spanner, and extract the pump from the tank. To fit the replacement, simply follow the reverse procedure.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on a Toyota Corolla
Replacing the Fuel Pump on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…
How to replace the fuel pump of the Toyota Corolla.
How to replace the fuel pump of the Toyota Corolla.
Toyota Corolla (2000-2007 / MK 2) Let's discover the useful instructions on how to disassemble and replace the fuel pump of the Toyota Corolla in simple steps. First, we open the rear…
How to Remove and Replace the Fuel Pump in the Toyota Corolla
How to Remove and Replace the Fuel Pump in the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Below are the step-by-step instructions to remove and replace the fuel pump in the Toyota Corolla. First, open the rear doors and start by removing t…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos