Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota 4Runner?

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the service light on a Toyota 4Runner. This operation is extremely simple and quick, and should only be performed after completing all required scheduled maintenance tasks.

Start by entering the cabin, then turn on the ignition. Use the button located to the right of the dashboard to navigate to the trip meter labeled "Trip A." Once you have done this, turn off the ignition and turn it back on while holding the same button.

Release it only once the interval has been successfully reset.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) .. In this tutorial, you will learn how to reset the service light on a Toyota 4Runner. This operation is extremely simple and quick, and.. …
How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) As we can see in this tutorial, resetting the service light on a Toyota 4Runner is very simple. Of course, this procedure should only be performed af…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos