Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : How to remove the driver's seat in the Toyota 4Runner?

Toyota 4runner - Video tutorial

Model: Toyota 4runner N280 - Years 2010-2023
Part: Seat
Operation: How to remove the driver's seat in the Toyota 4Runner?

In this tutorial we can see how to remove the driver's seat in the Toyota 4Runner, a very simple and quick operation. First of all, we open the hood, then disconnect the negative terminal of the battery in order to avoid accidental activation of the airbags. Next, we open the driver's door, unclip the two lower plastic covers and, using a socket wrench, we unscrew the fixing bolts of the brackets. At this point, all that remains is to disconnect the connector located under the seat, grab the seat and remove it from the cabin.


Posted on 13 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos