Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to obtain the maximum defogging on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: A/C controls

In this video we see how to get the most out of defogging the air conditioner of the Toyota Yaris XP130: if we get into the car and all the windows are fogged up, to defog them as quickly as possible, start the engine and turn the fan speed control knob to the maximum air flow speed, turning off the recirculation button if it is on to draw air from the outside. Turn the ventilation knob to the windshield setting, turn on the air conditioner to help remove moisture, and turn the knob to the maximum of the red zone, and also turn on the rear defroster.

Posted on 22 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Sailing technique with a Toyota Yaris Hybrid
Sailing technique with a Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) The sailing technique - or predictive driving - is a driving technique that allows fuel consumption to be reached around 30 km/l with a Toyota Yaris …
How do you recalibrate the semi-automatic MMT gearbox of a Toyota Yaris?
How do you recalibrate the semi-automatic MMT gearbox of a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) The semi-automatic MMT gearbox of a Toyota Yaris, after a certain number of miles (50,000, which is about 80,000 km), must be recalibrated, otherwise…
How to top up the coolant in the Toyota Yaris XP90
How to top up the coolant in the Toyota Yaris XP90
Toyota Yaris (2005-2011 / Xp90) In this video we can see how to top up the coolant of a Toyota Yaris XP90: it is very important to get the right liquid: visually it must be the same…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos