Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Pump

Model: (Various brands) Various
Part: Pump

This operation requires skill and special tools. To perform this repair, you will need to remove the engine from its housing for easier access, or you can try working by lifting your vehicle and removing the oil sump. This way, you can remove the bolts securing the oil pump for extraction. Once this is done, carry out the necessary work and either refit the old pump or install a new one. Then retrace the steps described for reassembling the various removed components.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Pump on a 2.0 TDi Engine
How to Replace the Oil Pump on a 2.0 TDi Engine
(Various brands) Various To replace the oil pump on a 2.0 TDi engine, lift the vehicle to access the bolts securing the oil sump at the bottom of the engine. Once removed, yo…
How to Clean the Oil Pump of a Chainsaw
How to Clean the Oil Pump of a Chainsaw
(Various brands) Various In this video, you can see how to clean the oil pump of a chainsaw. First, remove the chain cover to clean the bar and chain; degrease them with petr…
How to Replace the Water/Oil Pump Seal on a Kawasaki Motorcycle
How to Replace the Water/Oil Pump Seal on a Kawasaki Motorcycle
(Various brands) Various How to replace the water/oil pump seal on a Kawasaki motorcycle. First, remove the cover, take off the underlying cap, and then the sealing disc and …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos