Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Emergency solution to start the starter motor of a Ligier JS50.

Model: (Various brands) Ligier
Part: Alternator

In this video, we can see how to repair the alternator of a Ligier JS50 or JS60; we lift the front hood from the inside handle and then lift it from the outside. If the brushes are worn out, this is a temporary solution to start the alternator and still be able to start immediately: with a small hammer, we go to the alternator and give it small taps so that it shakes a bit and can start. Of course, this is an emergency solution that cannot be repeated too many times and still requires the replacement of the brushes to work, or even the replacement of the starter motor. This we can determine later.

Posted on 10 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Ligier JS50
How to Reset the "Service" Light on a Ligier JS50
(Various brands) Ligier (2013-2020 / ) Before you can start, sit in the driver's seat of your Ligier JS50. First, turn the ignition on and off. Next, open the door of your microcar while r…
When is the fuse diagram useful in the Ligier Js50?
When is the fuse diagram useful in the Ligier Js50?
(Various brands) Ligier The Ligier Js50 is a microcar, and you can see a presentation in the attached video. Its entire electrical system, like that of regular-sized vehicle…
How do you set the clock on the Ligier Js50?
How do you set the clock on the Ligier Js50?
(Various brands) Ligier The microcar we are talking about is the Ligier Js50, and we can see one in the attached video, focusing mainly on how to set the analog clock on the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos