Do it yourself
Frequently asked questions about cars and motorcycles

How is a starter motor made and how does it work?

Model: (Various brands) Various
Part: Starter motor

In this video we see how a starter motor is made and how it works: specifically, it is a 1.3 MultiJet engine, but in practice they do not vary much from each other. It is composed of the actual motor, the solenoid (which is an electromagnet), and a gear part, which rotates the motor. By turning the key, we send current through the solenoid coil. This moves the gear, which positions itself on the flywheel. At the same time, the starter motor engages and begins to rotate, giving rotation to the flywheel. In the back there are the "brushes", which are carbon brushes that carry current to the starter motor, then there is the rotor that moves the wheels that give movement to the gears. The solenoid has a button inside that rotates the motor only when the gears are correctly positioned, to avoid breakages. Electrically, the starter motor is ground, meaning it is the negative side of the circuit itself. The YouTuber gives precise indications on the electrical diagram and the mechanical peculiarities of the same, concluding an interesting lesson on this particular component.

Posted on 27 May 2025 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In today's article, we will see how the car starter motor works. When the key is inserted into the ignition lock, a signal is sent to the battery, wh…
(Various brands) Various How does the starter motor work? This video illustrates it: when you turn the key or press the button, the battery sends current to the electric moto…
(Various brands) Various In this video tutorial, you will see how an alternator works in a car. In classic cars, there is a three-phase alternator consisting of a casing with…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos