|
Do it yourself
| |||
| ||||
What are the issues with the Pure Tech 3-cylinder engine by Stellantis?
Model: (Various brands) Various
In this video, the problems of the Stellantis Pure Tech 3-cylinder engine are illustrated, a very talked-about engine because of the oil-bath timing belt: it is mounted on several models of the group. The oil-bath timing belt was designed to reduce noise and friction, but especially in the early versions it showed all its vulnerability. The main cause is oil contamination. In fact, during short journeys, the fuel that is not completely burned mixes with the engine oil, reducing its lubricating properties, which also leads to faster wear; this wear releases rubber particles, which further contaminate the oil; the contaminated oil in turn clogs the filter, lubrication ducts, and compromises the oil pump. In subsequent versions, the belts have been reinforced, software updated, and more frequent oil changes recommended. It is essential to keep an eye on the condition of the belt to avoid bigger problems with the engine, also checking for excessive fuel consumption, without neglecting the oil warning light. The timing belt breaking can have disastrous consequences, bending valves, damaging pistons, and requiring high repair costs. Not to mention the danger resulting from losing control of the vehicle. It is therefore essential to carry out preventive maintenance, changing the oil every 10,000 km, and checking the belt at every oil change.
Posted on 30 June 2025 by ScegliAuto
Video tutorial
Related tutorials
(Various brands) Various
In this video, we are explained in a simple and clear way what the problems of the PSA 1.2 Puretech petrol engine are. Basically, the problem with th…
(Various brands) Various
In this video we show the symptoms that indicate when the ignition coils of our car are faulty. First of all, it presents ignition problems, and cons…
(Various brands) Various
In this video we can see the problems that can arise from a malfunctioning Idle Air Control Valve (IACV); when it doesn't work properly, the engine i…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.578
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
