Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on a Microcar

Model: (Various brands) Microcar
Part: Clock

Video tutorial

In this video, we see how to set the clock on a Microcar: we need to disconnect the battery so that the clock disconnects, then reconnect it and turn on the ignition. On the right side of the dashboard, we have a small button, we hold it down and the clock appears, starting from zero or thereabouts.

It starts by flashing the hour, which we will adjust by briefly pressing the button we previously held down. When we have reached the desired time, we let it flash for a few seconds and then press the button again to move on to the minutes, which we will adjust in the same way; hold it down and the time disappears, meaning it has been set. We turn on the ignition, start the engine, and the clock is set correctly.


Posted on 7 September 2025 by ScegliAuto


Related tutorials

Reset the Service Light on a Microcar M-8
Reset the Service Light on a Microcar M-8
(Various brands) Microcar This guide outlines the main instructions for resetting the service light for the engine oil change on a Microcar M-8. First, get inside the vehicle …
The fuses of the microcar MC2, where are they located?
The fuses of the microcar MC2, where are they located?
(Various brands) Microcar The Microcar MC2, which we see in the attached video, offers us the opportunity to consult the fuse boxes present in it, thanks to the wiring diagram…
What is the fuse diagram for the 2009 Microcar Mgo?
What is the fuse diagram for the 2009 Microcar Mgo?
(Various brands) Microcar The Mgo of 2009, belonging to the Microcar category, presented in the video, is, as usual, equipped with fuses dedicated to the protection of each in…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos