|
Do it yourself
| |||
| ||||
How to adjust the beam of light of our car headlights on our own
Model: (Various brands) Various
Let's see how to adjust the front light beam of the car. First, remove any unnecessary weight from the trunk and the cabin, so that the car has a normal balance. Park on a flat surface and stabilize the suspension: measure the height from the ground of the center of each headlight, to ensure they are both at the same height. Turn on the low beams and bring the car close to the wall; mark the brightest point in the center of each beam with a piece of tape. Draw a horizontal line using a level; if the two points are not at the same height, use the height of the lower headlight as a reference, and lower the other mark to align them. This line represents the maximum height the light beam should reach. Move the car straight back: the correct distance is 7.5 meters (25 feet). Now observe the headlights on: the brightest points should be slightly below the horizontal lines we marked, and symmetrical. Open the hood and find the adjustment screws on the back of each headlight, one vertical and one horizontal; for more precision, cover the other headlight with a cloth, so you only see the beam of the one you are adjusting.
Posted on 27 October 2025 by ScegliAuto
This video is currently unavailable
Related tutorials
(Various brands) Various
In this video we can see how to adjust and align the headlights: we see how to adjust the height of our headlights. We need to stand in front of a wh…
(Various brands) Various
The procedure for adjusting your car's headlights must be carried out with the vehicle parked on a level surface. You will need a headlight alignment…
(Various brands) Various
In this video, you can see how to perfectly adjust the beam of your car's front headlights. To make the adjustment, you will need a tape measure, som…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.984
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |