Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the parking brake

Model: (Various brands) Various
Part: Parking brake

Video tutorial

Today we will explain how to perform the electronic parking brake reset process on a four-wheel vehicle. To perform the parking brake check, we must press the "P" button, located on the central dashboard.

By holding down the button for about 15 seconds, we will start the electronic control process. Please note that depending on the vehicle model, you may see all the dashboard lights flashing, but once the lights have stopped flashing, you can release the button or control switch to check that the reset has been done correctly.

To check that the reset has been done correctly, start the engine and engage a gear or reverse, press the handbrake release button. If the brake works correctly, you will notice a change in the vehicle, if not, it is necessary to go to the workshop for a diagnostic check.

To prevent brake malfunctions, it is important to perform periodic checks at the workshop and make sure to install updates released by the manufacturer.


Posted on 12 November 2025 by ScegliAuto


Related tutorials

Replacing Rear Brake Pads on Vehicles with EPB
Replacing Rear Brake Pads on Vehicles with EPB
(Various brands) Various This video outlines the necessary steps to replace the rear brake pads on vehicles equipped with an EPB (Electric Parking Brake) system. First, activ…
How to Release the Electric Parking Brake (EPB) in an Emergency
(Various brands) Various This procedure applies to both Hyundai and Kia vehicles and is used to manually release the EPB (Electric Parking Brake) when the battery is flat. It…
How to reset a Pioneer radio
How to reset a Pioneer radio
(Various brands) Various (2012-2023 / ) In this video, see how to reset a Pioneer FNX 5080 radio and restore it to factory settings: turn it on, and with a pen or another pointed object, pr…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos