Do it yourself
Frequently asked questions about cars and motorcycles

How to replace a blown fuse in a car

Model: (Various brands) Various
Part: Fuse box

In this short video, we see how to replace a blown fuse in our car: the fuse extraction tool is usually found in the fuse box itself. We identify the problem using our car's manual and locate the box. We turn off the engine and remove the key from the ignition. We open the cover; a mirrored diagram is often printed on the back. Having identified the faulty fuse with the help of the diagram (and the user and maintenance manual), we use the tool and extract the transparent fuse. If the filament is intact, then we need to look for the problem elsewhere. If it is blown (sometimes the plastic turns black), we replace it with one of the same amperage, never with one of a higher value, which could cause severe damage. We insert the new fuse, close the box, and check. If the fuse blows immediately, then there is a more serious electrical fault in the system.

Posted on 14 January 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Removing a fuse from its box is a simple operation, but it requires some precautions: first of all, the car must be turned off. We locate the fuse bo…
(Various brands) Various What we see in the video is a well-known emergency trick among mechanics and enthusiasts. You just need to have a burnt fuse of the same size as the …
(Various brands) Various Let's see how to test the functionality of the fuses in your car. You will need a test lamp, which can be found, for example, on Temu with the code 6…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where to find the fuses of the Yamaha T-max 530 DX? Read answer
    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos