Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust Car Door

Model: (Various brands) Various
Part: Car door

Tools required: caliper and inverted T40 torx key. The procedure involves measuring the door misalignment, i.e., the misalignment between the front and rear doors. Use a caliper to measure this misalignment, which in this example is 1.4mm. Locate the door lock and mark its original position with tape, loosen it using the T40 torx (or the original bolt, which may differ), and slightly move it up or down. Tighten the bolts and check if the door has regained alignment. If not, repeat the process until satisfactory alignment is achieved.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the Pioneer Super Tuner 3D radio
How to set the clock on the Pioneer Super Tuner 3D radio
(Various brands) Various Setting the time on the Pioneer Super Tuner 3D car radio is a simple and quick operation to be carried out independently. To set the time, we must tu…
How to adjust the clock of the 2000 Sony car radio
How to adjust the clock of the 2000 Sony car radio
(Various brands) Various Today we will explain how to set the time on a 2000 Sony car radio model. The steps to follow to set the time are: - turn on the dashboard; - turn on…
How to adjust tire pressure
How to adjust tire pressure
(Various brands) Various Today we will explain how to adjust the tire pressure of your vehicle. Tire pressure should be checked at least once every three months, especially i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos