Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement for Your Car

Model: (Various brands) Various
Part: Engine oil

Do you want to service your car? Let’s look at the oil and filter replacement. Lift the front bonnet of the car and secure it, then locate the oil filter (if present in the engine bay). Unscrew the filter located in the engine bay or underneath the vehicle, then raise the vehicle. Lift the car on a column lift or jack, unscrew the bolt of the oil sump with a socket spanner (after removing the plastic protective panel), allow the fluid to drain into a disposal container and refit the sump bolt. After removing the oil from the engine, fill the sump with new engine oil.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Engine Oil in Your Car
Replace Engine Oil in Your Car
(Various brands) Various How to replace the engine oil in your car? Let’s look at the oil and filter replacement. Lift the front bonnet of the car and secure it, then locate …
How to Check Your Car's Oil Level
How to Check Your Car's Oil Level
(Various brands) Various Regularly checking the engine oil level in the reservoir is very important as it allows you to top it up in a timely manner and thus avoid potential …
How to Change the Car Oil
How to Change the Car Oil
(Various brands) Various How do you change the engine oil in your car? Here’s how to change the oil and filter in the car. Open the car door and pull up the engine compartmen…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How much oil is needed for the Harley-Davidson Fat Boy? Read answer
    • Vari - What does the "Oil Insp" message mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos