Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fluid on the Suzuki Burgman

Model: (Various brands) Various
Part: Antifreeze coolant

Video tutorial

To replace the coolant on this scooter model, follow the instructions provided in the video and the description below. Perform the replacement when the engine is cold.

First, remove the footrest plastic panels. Underneath, you will find screws to remove the lower covers.

Next, take off the panel located under the seat at the front by removing the rivets, then detach the plastic panel on the side. Locate the hose at the bottom of the radiator and the tank with the expansion vessel.

Loosen the hose clamp at the base of the radiator to allow all the fluid to drain out. After that, tighten the clamp again and fill the system with new fluid from the top of the radiator.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator
How to Replace the Radiator
(Various brands) Various To perform this operation, you will need to drain the fluid from the radiator. Prepare a suitable container to place under the radiator to collect it…
What is the lubricant heat exchanger?
What is the lubricant heat exchanger?
(Various brands) Various To cool the lubricant temperature inside the engine, there is a radiator known as a heat exchanger because it is traversed by the radiator fluid in o…
Operation of the Engine Cooling System
Operation of the Engine Cooling System
(Various brands) Various In this video tutorial, you will see a diagram representing the operation of the radiator and the entire cooling system of an internal combustion eng…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos