Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Adjusting the Front Headlight Beam

Model: (Various brands) Various
Part: Checks and maintenance

This guide outlines the recommended procedure to adjust the headlight beam of a generic car, following these simple and quick steps. First, position the vehicle in front of a neutral, even wall to see the uniform light beam; keep the vehicle about 10 feet (3 metres) away from the wall. Now, check that both headlights are at the same height; if not, make manual adjustments using the screw located near the headlight until they are aligned!

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust Car Headlights
How to Adjust Car Headlights
(Various brands) Various Adjusting the front headlights is a task that requires the intervention of a qualified operator and a specific tool called a headlight adjuster. Befo…
How to Adjust Headlight Alignment
How to Adjust Headlight Alignment
(Various brands) Various Adjust the headlight alignment. The beam should point downwards. The internal adjustment raises the beam (but this depends on the vehicle's load). Th…
How to Replace the Front Headlamp Bulb on a Pontiac Solstice
How to Replace the Front Headlamp Bulb on a Pontiac Solstice
(Various brands) Various If you need to replace the front headlamp bulb on your Pontiac Solstice but are unsure of the steps to follow, read this guide carefully and apply th…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos