Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the FAP Cylinder from a Car Lock

Model: (Various brands) Various
Part: Key

In this tutorial, you will see how to extract the FAP cylinder from a car lock by following some simple steps that will help you work independently, saving time and money. The materials needed for this job are: the lock cylinder, a tool (a piece of copper or sheet metal or a small knife blade), and the car ignition key. The first step is to insert the key into the cylinder and turn it to the open position (counterclockwise), with the notch facing right. At this point, insert the tool and extract the cylinder.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various If you need to replace the lock (cylinder) for the door of a camper, proceed as follows: take the opening key and turn the cylinder fully countercloc…
(Various brands) Various The video we see is not specific to a vehicle, but the situation can also occur in a car. In fact, if it happens in a car, it is particularly critica…
(Various brands) Various The technique shown in this video tutorial could be useful in case the opening key of our car breaks inside the door lock. It is necessary to arm one…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos