Do it yourself
Frequently asked questions about cars and motorcycles

How to Recharge Your Car Battery with Crocodile Clips

Model: (Various brands) Various
Part: Battery

In this video, learn how to recharge your car battery using these handy crocodile clips. You can find them on Amazon with the code B0B1ZWZ6LZ for £27.89, with free delivery for Prime customers. After confirming that both batteries are of the same voltage, connect the first red clamp to the positive terminal of the faulty vehicle, then connect the second red clamp to the positive terminal of the recovery vehicle. Next, connect the black clamp to the negative terminal of the recovery vehicle. Now, connect the other end of the negative clamp to the bodywork of the faulty vehicle, not to the negative terminal. Start the faulty vehicle and wait a minute before slightly revving the engine. Repair completed.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this model, you will learn how to charge the battery of the Vespa 300 GTS. Before charging the battery, insert the key and try to start the engine…
(Various brands) Various In this video tutorial, you can see how to install a battery in a scooter. The first thing to do is take a star screwdriver and start unscrewing the …
(Various brands) Various In this video we see how to recharge the car battery with a booster. The booster is nothing more than a starter, a portable battery to which to conne…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos