Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Car

Model: (Various brands) Various
Part: Tire pressure warning light

Video tutorial

The TPMS light illuminates on a vehicle when the tyre pressure no longer meets the manufacturer's specifications. This yellow light is usually not concerning, but you must adjust the pressure as soon as possible to avoid damaging the car's wheels.

After inflating the tyres to the manufacturer's recommended pressure, which is indicated on stickers on the sides of the car doors, proceed to reset the light. On some vehicles, it is necessary to start the engine and rev it, or drive a few miles.

On other vehicles, the reset is manual and must be performed through the settings menu; where you will need to select the option corresponding to tyre pressure, set the values, and confirm the reset.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on VW and Skoda Vehicles?
How to Reset the TPMS Light on VW and Skoda Vehicles?
(Various brands) Various After adjusting the tyre pressures, you need to proceed with resetting the TPMS light. To perform the reset, turn on the ignition and press the CAR b…
How to Reset the TPMS Light on the Scion XB
How to Reset the TPMS Light on the Scion XB
(Various brands) Various In Scion XB vehicles, the TPMS light comes on when it is necessary to adjust the tyre pressure. Only after this can you reset the TPMS light. To perf…
How to Reset the TPMS Warning Light
How to Reset the TPMS Warning Light
(Various brands) Various Turn the key to the On position without starting the engine. Press the TPMS reset button and hold it until the light flashes three times, then releas…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos