Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Warning Light

Model: (Various brands) Various
Part: Tire pressure warning light

Video tutorial

Turn the key to the On position without starting the engine. Press the TPMS reset button and hold it until the light flashes three times, then release it. Start the car and let it run for 20 minutes to reset the sensor.

Generally, the tyre pressure reset button is located on the steering wheel. Always ensure ideal conditions to avoid hazards; the vehicle must be completely secure.

The TPMS is a very useful tool that detects both tyre malfunctions and simultaneously checks if the tyre pressure is low.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on a 2008 Scion XB
How to Reset the Tyre Warning Light on a 2008 Scion XB
(Various brands) Various To manually reset the tyre warning light on your 2008 Scion XB, you only need a few seconds. First, enter the cabin and reach the driver's seat, then…
How to Replace the TPMS Valve and Reset the Dashboard Warning Light?
How to Replace the TPMS Valve and Reset the Dashboard Warning Light?
(Various brands) Various In this video, we will show you how to replace the TPMS valve and reset the dashboard warning light. Insert the diagnostic device into the OBD port a…
How to Reset the TPMS Light on the Scion XB
How to Reset the TPMS Light on the Scion XB
(Various brands) Various In Scion XB vehicles, the TPMS light comes on when it is necessary to adjust the tyre pressure. Only after this can you reset the TPMS light. To perf…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos