Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check a car's traction?

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

Advanced traction control has two modes of operation, with the automatic mode being the default. The system can identify surfaces with low grip and adjusts braking torque and driving torque to improve tyre adhesion.

If you are an experienced driver, you can activate the 'Expert Driver' mode via the onboard computer, allowing the braking torque adjuster to be active while the driver maintains control of the driving torque using the accelerator pedal. However, if you exceed 25 miles/h, the system will revert to automatic mode.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Rotate Tyres
How to Rotate Tyres
(Various brands) Various What is the procedure for rotating tyres? The basic procedure is to loosen the wheel nuts while the car is still on the ground, then lift the car and…
Everyone can mount snow chains.
Everyone can mount snow chains.
(Various brands) Various Mounting snow chains has always been a nightmare for everyone, especially for women. In this video, a friendly youtuber shows us that mounting chains…
What does the traction control warning light mean?
What does the traction control warning light mean?
(Various brands) Various In this video we see what it means when the traction control light comes on, which may be slightly different depending on the model of our car, but w…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos