Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : One possible reason why the horn and steering wheel controls do not work.

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Checks and maintenance
Operation: One possible reason why the horn and steering wheel controls do not work.

In this video, we can identify a reason why sometimes the horn or the steering wheel controls of our car may not work. The reason could be the clock spring, a component located in the steering wheel that is responsible for transferring data. In practice, this device, with its spiral shape, follows us and our steering actions and transfers information regarding the horn, airbag, and controls in general that we have on the steering wheel, such as the radio controls or those of the cruise control or speed limiter. If there are any issues with these devices, taking a look at this component - on which we as users cannot intervene in terms of usage - is a good idea.


Posted on 2 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vari - What does it mean when the "Hill Hold Control" system is not available? Read Answer
    • Vari - What does x100 mean? Read Answer
    • Vari - Why is the trunk of the Mercedes locked? Read Answer
    • Vari - What does the illuminated ABS light indicate on the Kymco Downtown 300I? Read Answer
    • Vari - When does the message SRS FAULT VISIT WORKSHOP appear in Mercedes cars? Read Answer
    • Vari - What does the spring-shaped indicator light indicate? Read Answer
    • Vari - What does the glow plug indicator on Mercedes indicate? Read Answer
    • Vari - What do the red lights on Harley Davidsons indicate? Read Answer
    • Vari - Why is the fuel cap locked? Read Answer
    • Vari - What does code 84 mean in Opel? Read Answer
    • Vari - What should you do if the remote control of a Volkswagen car is not working? Read Answer
    • Vari - What is the position of the oil drain plug in the Yamaha YZ450GF? Read Answer
    • Vari - Why does the engine malfunction light turn on in the Piaggio Vespa GTS 300? Read Answer
    • Vari - What does the term "Passive entry" in Jeeps indicate? Read Answer
    • Vari - What does the Service light on the MG 6 indicate? Read Answer
    • Vari - What does the EDC warning light indicate in an Iveco vehicle? Read Answer
    • Vari - What problems does the Piaggio MP3 400 have? Read Answer
    • Vari - How often should the Ducati Scrambler be serviced? Read Answer
    • Vari - What is the cost of a service for the Yamaha Majesty 400? Read Answer
    • Vari 2019-2026 - Why won't the Fitbit Versa dashboard turn on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos