Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Symptoms of a Faulty High-Pressure Fuel Pump

Model: (Various brands) Various
Part: Fuel pump

In this video, you will see the symptoms of a malfunctioning high-pressure fuel pump: first, you may hear a metallic noise inside the engine bay due to the spring sliding over the cam, which is pushed very quickly and creates high pressure in the fuel. Inside, there is a roller that can wear out or get damaged, causing a sort of whistling, and the engine warning light will also illuminate, with error code P0087 readable on the ECU. Another symptom could be difficulty starting, or when revving between 2,000 and 4,000 RPM, you may experience hesitations or backfires. You may also notice increased fuel consumption, low power, and irregular idle. It is therefore essential to test the pump using the specifications for your vehicle and check that the components are in good condition. Working on these high-pressure components can be very dangerous, so it is crucial that the work is carried out with safety measures; otherwise, it is better to entrust the job to specialists.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the High-Pressure Pump Bushing
How to Replace the High-Pressure Pump Bushing
(Various brands) Various If your car exhibits increased noise, reduced performance, a rough-running engine, or stalling, the causes may include fluctuations in pressure in th…
Symptoms of a Faulty Timing Chain
Symptoms of a Faulty Timing Chain
(Various brands) Various In this video, we will see the symptoms of a faulty timing chain: first of all, an engine that offers reduced performance, weak acceleration due to d…
What are the symptoms of a faulty alternator?
(Various brands) Various What are the symptoms that we should be able to recognize in our car, which give us an indication of a faulty alternator? It is important to be able …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos