Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the IDV D90 Australia?

Model: (Various brands) Various
Part: Service warning light

Video tutorial

As is easy and correct to imagine, this SUV also requires scheduled maintenance, determined by the manufacturer based on mileage or elapsed time. This includes changing the engine oil, the oil filter, and more.

After completing this, you must also proceed to clear the maintenance warning light, and this video provides guidance on how to do it. The procedure shown here illustrates how to set the clock, but the principle is the same; access the Settings from the central touchscreen and select the Maintenance option, then follow the suggested steps and the process will easily come to an end.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How do you replace the key battery in the IDV afterwards?
How do you replace the key battery in the IDV afterwards?
(Various brands) Various The replacement of the key remote control battery, visible in this video, takes as an example the IDV T60, but both the key and the operating procedu…
How can the Service light be reset in the IDV v80 PDF?
How can the Service light be reset in the IDV v80 PDF?
(Various brands) Various No type of vehicle equipped with a thermal engine is exempt from periodic maintenance, specifically the oil and filter change of the engine. It is im…
Where is the OBD Port on the 2023 LDV SUV?
Where is the OBD Port on the 2023 LDV SUV?
(Various brands) Various The OBD port on a 2023 LDV SUV/D90 is located inside the vehicle's cabin, specifically under the steering wheel, just above the brake and accelerator…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How do you reset the Sym Fiddle's oil warning light? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos