Do it yourself
Frequently asked questions about cars and motorcycles

Fuse layout and diagram of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years 2012-2019
Part: Fuse box

Today we will discover the positioning of the fuse boxes of the Volkswagen Golf, in simple and quick steps. First of all, we open the front door on the driver's side and start removing the plastic cover next to the steering wheel; inside we will find the fuse box, as shown in the video. We open the hood of the car and remove the plastic cover located on the top right, accessing the external fuse box; inside the cover we find the fuse diagram, also available in the owner's manual (useful for replacing fuses).

Posted on 24 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / Golf 6, 5K1, Golf VI, MK 6) Below we will discover how to access the internal fuse box of the Volkswagen Golf, by obtaining the fuse diagram and layout. First, let's open the fr…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The instructions in this guide will illustrate the layout and positioning of the external fuse boxes for the Volkswagen Golf. First, open the vehicle…
Volkswagen Golf (2003-2008 / MK 5, Golf V, Golf 5) In this guide, we will look at the information related to the positioning and layout of the external fuse box of the Volkswagen Golf. First, let's op…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos