Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Volkswagen up!

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Door trim panel

Video tutorial

To remove the door panel on your Volkswagen up!, start by opening the front door. Take a flat screwdriver and carefully remove the panel around the door handle.

Now, locate the screw behind the panel and unscrew it. Then, using a panel tool, pry at the edges of the door panel to detach it from the bodywork. Be careful not to damage the panel or internal components.

Once detached, lift the panel upwards, taking care with the electrical connectors. Now, the panel is ready to be completely removed to work inside the door.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel from a Volkswagen Up
How to Remove the Door Panel from a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let's see how to remove the door panel from a Volkswagen Up. Before starting the dismantling work, disconnect the battery connectors located in the e…
How to Remove the Door Panel on a Volkswagen Up
How to Remove the Door Panel on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Begin by disconnecting the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover and unscrew the screws …
How to Remove and Replace the Engine Air Filter on a Volkswagen Up
How to Remove and Replace the Engine Air Filter on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) See how to remove and replace the engine air filter on a Volkswagen Up. Open and lift the front bonnet (where the engine is located), securing it. Re…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos