Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel from a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Door trim panel

Video tutorial

Let's see how to remove the door panel from a Volkswagen Up. Before starting the dismantling work, disconnect the battery connectors located in the engine compartment. Start the dismantling: use a lever to remove the plastic caps on the panel, then, with a screwdriver, undo the securing screws on the plastic panel.

Once all screws are removed, use the lever to detach all the plastic clips that secure the door. Remove the door panel by hand, disconnect any power connectors and release cable.

Refitting the new panel.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Volkswagen up!
How to Remove the Door Panel on a Volkswagen up!
Volkswagen Up (2011-2024 / MK 1) To remove the door panel on your Volkswagen up!, start by opening the front door. Take a flat screwdriver and carefully remove the panel around the d…
How to Remove the Door Panel on a Volkswagen Up
How to Remove the Door Panel on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Begin by disconnecting the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover and unscrew the screws …
How to Remove the Door Panel of a Volkswagen Up
How to Remove the Door Panel of a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Before starting, open the door of your Volkswagen Up. Begin by prying out and removing the screw covers. This will expose the screws that secure the …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos