Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Door trim panel

Video tutorial

Begin by disconnecting the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover and unscrew the screws underneath. Remove the remaining screws from the door panel and detach the retaining clips.

Disconnect the wiring for the window regulator, the speaker in the handle, and the tension cable for the door release lever. Finally, pull off the panel and detach it from the door.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Volkswagen up!
How to Remove the Door Panel on a Volkswagen up!
Volkswagen Up (2011-2024 / MK 1) To remove the door panel on your Volkswagen up!, start by opening the front door. Take a flat screwdriver and carefully remove the panel around the d…
Where is the OBD Port on the Volkswagen Up?
Where is the OBD Port on the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) If you want to connect a diagnostic tool to resolve any issues with the control unit of your Volkswagen Up but do not know where the OBD port is, do …
How to Replace the Front Headlight Bulbs on Volkswagen Up
How to Replace the Front Headlight Bulbs on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Have you blown a front headlight bulb? Here’s how to remove them on the Volkswagen Up. Open the front bonnet by pulling the lever located at the bott…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos