Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Volkswagen Jetta 1.8T

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Timing belt

See other generations:
Video tutorial

Today we will discover the main information on how to disassemble and replace the timing belt of the Volkswagen Jetta 1.8T. First, we open the car's engine hood and start by disassembling and removing the serpentine belt and the coolant reservoir, disconnecting the pipes; then we lift the car and remove the crankshaft pulley, removing the timing cover, as shown in the video.

At this point, we take the necessary references for the replacement of the belt, installing the original one; we replace the water pump kit if necessary and reassemble all the other components.


Posted on 18 February 2025 by ScegliAuto


Related tutorials

How and when to replace the timing belt of the Volkswagen Jetta 1.9 TDI
How and when to replace the timing belt of the Volkswagen Jetta 1.9 TDI
Volkswagen Jetta (1998-2005 / A4, MK 4) In this guide, we will see the main instructions for disassembling and replacing the timing belt of the Volkswagen Jetta 1.9 TDI; the service manual …
How to replace the timing belt on the Volkswagen Jetta?
How to replace the timing belt on the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the timing belt on the Volkswagen Jetta, lift the car so that the front right wheel is off the ground. Remove the wheel to access the inne…
Guide to replacing the timing belt of the Volkswagen Jetta 2.0L
Guide to replacing the timing belt of the Volkswagen Jetta 2.0L
Volkswagen Jetta (2010-2018 / MK 6, A6) Today we will see the main directions that will allow us to disassemble and replace the timing belt of the Volkswagen Jetta 2.0L. First, we open the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos