Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Volkswagen Jetta 2.0L

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Timing belt

Today we will see the main directions that will allow us to disassemble and replace the timing belt of the Volkswagen Jetta 2.0L. First, we open the hood of the car and start by removing the engine support, unscrewing the fixing bolts; then we lift the car and remove the right front wheel, dismantling the fender and disconnecting the V-belt. At this point, we remove the crankshaft pulley and the distribution cover, taking the necessary references for the replacement of the timing belt, following the video tutorial until the end!

Posted on 7 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on a Volkswagen Jetta 1.9 TDI
Guide to Replacing the Timing Belt on a Volkswagen Jetta 1.9 TDI
Volkswagen Jetta (1998-2005 / A4, MK 4) Here are the instructions for removing and replacing the timing belt on a Volkswagen Jetta 1.9 TDI. First, open the vehicle's bonnet and begin by rem…
How and when to replace the timing belt of the Volkswagen Jetta 1.9 TDI
How and when to replace the timing belt of the Volkswagen Jetta 1.9 TDI
Volkswagen Jetta (1998-2005 / A4, MK 4) In this guide, we will see the main instructions for disassembling and replacing the timing belt of the Volkswagen Jetta 1.9 TDI; the service manual …
Guide to Replacing the Air Conditioning Compressor on the Volkswagen Jetta 2.5
Guide to Replacing the Air Conditioning Compressor on the Volkswagen Jetta 2.5
Volkswagen Jetta (2010-2018 / MK 6, A6) Today's guide will provide instructions for removing and replacing the air conditioning compressor on the Volkswagen Jetta 2.5L. First, lift the vehi…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos