|
Do it yourself
| |||
| ||||
How to change the spark plugs on the Volkswagen Polo V
Model: Volkswagen Polo
6R, MK V, Polo 5, Polo V, MK 5
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
In this video we see how to replace the spark plugs on the Volkswagen Polo V: we open the hood and remove the cover of the engine block, then we remove the electrical connectors that supply power to the coils; if we want to remove all the coils at once, it is better to number them, otherwise our advice is to replace them one at a time. Using a compressed air sprayer (not at high pressure) we clean the inside of the spark plug holes from any dirt that may have accumulated. Using a 16 mm socket wrench and an extension, we remove the spark plugs, being very careful not to drop them into the hole, as it would be very difficult to retrieve them. Before installing the new spark plugs, we apply a layer of anti-seize to the threads of the new spark plugs, then, with the same caution we used to remove them, we insert them into the holes, tightening them to 26 Nm. We replace the ignition coils and connect the electrical connector. We put the engine block cover back in place and the operation is complete.
Posted on 13 June 2025 by ScegliAuto
Related tutorials
Volkswagen Polo
(2001-2009 /
MK IV, Polo 4, 9N, MK 4, Polo IV)
How to remove and replace the spark plugs on a Volkswagen Polo? Learn how to proceed: open the engine bay and lift the front bonnet, secure it, and d…
Volkswagen Polo
(2001-2009 /
MK IV, Polo 4, 9N, MK 4, Polo IV)
How do you change the spark plugs on a Volkswagen Polo? First, open the engine compartment and lift the bonnet, then disconnect the battery terminals…
Volkswagen Polo
(2001-2009 /
MK IV, Polo 4, 9N, MK 4, Polo IV)
Do you want to remove the spark plugs on your Volkswagen Polo? Let's see in this video how to do it. Pull the engine compartment release lever and li…
Other guides you may be interested in
|
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |