Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of the Volkswagen Touran

Model: Volkswagen Touran 5T, MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car door

See other generations:
Video tutorial

In this video we can see how to disassemble the inner panel of the door of a Volkswagen Touran: we start by removing the cover of the handle using a plastic spatula; we remove the electrical connector of the electric window control, and then we remove the two torx screws that we have uncovered.

In the lower part of the panel, there are two more torx screws that we will also need to remove, then using the same spatula, we start to lever the panel, starting from the bottom, then from the sides, and when we have removed the side clips, we push upwards until the panel comes out of its housing.

At this point we just need to disconnect two electrical connectors, and we're done.


Posted on 5 September 2025 by ScegliAuto


Related tutorials

How to Remove the Panel on a Volkswagen Touran to Access the Lock
How to Remove the Panel on a Volkswagen Touran to Access the Lock
Volkswagen Touran (2003-2015 / 1T, MK 1) How to remove the panel on a Volkswagen Touran to access the lock? Do not worry, learn how to proceed. Before starting the disassembly work, disconne…
How to Remove the Door Panel from a VW Touran
How to Remove the Door Panel from a VW Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Do you want to remove the door panel from the Touran? Let’s see how to take off the cover panel. Detach the plastic covering the inner handle, then u…
How to Remove the Rear Door Panel and Lock of a Volkswagen Touran
How to Remove the Rear Door Panel and Lock of a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) The following steps will illustrate how to remove the rear door panel and lock of a Volkswagen Touran. First, open the rear door of the vehicle and b…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos