Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake light bulb of the 2015 Volkswagen Passat

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

In case of malfunctioning brake light bulb in your 2015 Volkswagen Passat, you should proceed to replace it as soon as possible for both safety and legal reasons. Let's find out how to do it together.

First of all, lift the rear hood of the car and remove the small protective cover located on the side of the trunk. At this point, also remove the safety hook and disconnect the electrical connector.

Immediately after, remove the rear headlight of your Volkswagen Passat and proceed with the replacement of the brake light bulb.


Posted on 24 September 2025 by ScegliAuto


Related tutorials

Replacing the Rear Brake Pads on a Volkswagen Passat
Replacing the Rear Brake Pads on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) The following steps will guide you on how to remove and replace the rear brake pads on a Volkswagen Passat. First, lift the vehicle and start by remo…
How to Replace the Front Headlight Bulb of the Volkswagen Passat?
How to Replace the Front Headlight Bulb of the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To replace the front headlight bulb of the Volkswagen Passat, lift the bonnet to access the rear of the headlight corresponding to the bulb to be rep…
Replacing the Front Headlamp Bulb on Volkswagen Passat B6
Replacing the Front Headlamp Bulb on Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) In this video, you will see how to replace the rear lamp bulb on your Volkswagen Passat B6. First, open the boot lid: to replace the bulb, unclip the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos