Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Hood of a VW New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Convertible top

See other generations:
Video tutorial

How to remove the hood of a Volkswagen New Beetle? Let's see how to proceed in this video: use a screwdriver to remove the side plastic covers located at the edges of the hood (inner side if present), then unscrew the nuts with a spanner or socket wrench.

Once the nuts are removed, move the hood back (as shown in the video), detach the plastic covers of the hood from the upper side of the car. Remove the hood retaining clips located on the frame of the car's opening roof.

Finally, remove the hood from the vehicle body and prepare to fit a new one with clips and fasteners included.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Install the Hood Lining on a Volkswagen New Beetle?
How to Install the Hood Lining on a Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To install the hood lining on a Volkswagen New Beetle, first lower the hood completely so that the lining can be inserted from one side and then the …
Instructions for Removing and Installing the Hood on Volkswagen New Beetle
Instructions for Removing and Installing the Hood on Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this video tutorial, you will see some important instructions for removing and installing the hood on a Volkswagen New Beetle. First, open the hoo…
How to Remove the Roof Position Sensor on a Volkswagen Beetle (Maggiolone)
How to Remove the Roof Position Sensor on a Volkswagen Beetle (Maggiolone)
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this guide, you will find the instructions that will allow you to remove the roof position sensor on a Volkswagen Beetle Cabriolet, also known as …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos