Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlights of the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

See other generations:
Video tutorial

Briefly, we will see the instructions that will allow us to remove and replace the front headlights of the Volkswagen Polo. First, open the car's bonnet and start unscrewing all the fixing screws of the headlight unit found at the top; then disconnect the electrical connector of the bulbs located behind the headlight to remove it, as shown in the video.

At this point, we can replace the bulbs or the entire front headlight, reassembling it on the bodywork and reconnecting it; check the operation of all lights.


Posted on 10 January 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlights of the Polo 5
How to Remove the Front Headlights of the Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Removing the front headlights of the Volkswagen Polo 5, produced until 2017, can be done independently in just a few minutes. The steps to follow are…
How to Remove the Front Seat of the Volkswagen Polo
How to Remove the Front Seat of the Volkswagen Polo
Volkswagen Polo (1981-1994 / Polo II, Polo 2, MK 2, 86C) The steps in this guide will show you how to remove and replace the front seat of the Volkswagen Polo. First, open the driver's side front door and s…
How to Replace the Front Suspension on a Volkswagen Polo
How to Replace the Front Suspension on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, you will find instructions to remove and replace the front suspension on a Volkswagen Polo. First, open the bonnet of the vehicle and …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos