Do it yourself
Frequently asked questions about cars and motorcycles

What to do if the "electronic handbrake error" message appears on the dashboard of our Volkswagen T-Roc.

Model: Volkswagen T Roc MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Parking brake

See other generations:
Video tutorial

The warning light or the message "electronic handbrake error" indicates that the handbrake control unit has detected an anomaly. First, let's make sure that nothing (a bottle, a package, etc.) is inadvertently pressing the EPB or auto-hold buttons on the center console; let's drive for a few kilometers: sometimes it's just a software glitch that resets after a few kilometers; let's try turning off and on the car after 2/3 minutes, and opening and closing the driver's door.

If the error persists, let's try the calibration recommended in the video: disconnect the battery (negative terminal) for 10/15 minutes to reset the control units. Hold down the brake pedal for 30 seconds, and while holding it, also press the handbrake button for about 10 seconds.

While keeping both buttons pressed, start the engine. Release the EPB button (we should hear a cycle of activation/deactivation of the brake).

Turn off the engine and then turn the ignition back on. The error should be gone.


Posted on 22 January 2026 by ScegliAuto


Related tutorials

Volkswagen T Roc (2017-2025 / MK 1) Obdleven is an electronic device used not only to decode error codes of vehicles, such as the Volkswagen T-Roc, but also to enable various commands, …
Volkswagen T Roc (2025-2026 / MK 2) Activating the ambient light or lights, in the case of the Volkswagen T-Roc, involves not only illuminating the cabin but also personalising the colo…
Volkswagen T Roc (2017-2025 / MK 1) .. sit in the driver's seat of your Volkswagen T-Roc. The infotainment system consists of all the virtual controls within the onboard computer related.. …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos