Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

To remove the original car radio, you first need the appropriate release keys. At the lower ends of the car radio, there are two small slots where the keys must be inserted to disengage the security springs that hold the radio in the dashboard.

Insert the keys fully with the bevel facing inwards, disengage the locking springs, and pull the radio outwards using the keys. Once removed, disconnect the plugs attached to it, paying attention to the FM antenna connector's lock.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to enter the radio code for the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) This guide will show you how to enter and retrieve the radio code for the Volkswagen New Beetle in simple and quick steps. First, get into the vehicl…
Removing the Original Radio from a New Beetle
Removing the Original Radio from a New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Is the radio in your Volkswagen New Beetle damaged? Here’s how to remove it from the central dashboard. Insert the release keys into the slots on the…
How to Remove a Stuck CD from the New Beetle's Radio
How to Remove a Stuck CD from the New Beetle's Radio
Volkswagen New Beetle (1999-2012 / 9C, MK 2) This video tutorial shows the procedure for removing a stuck CD from the radio. Specifically, this video is for the Volkswagen New Beetle, but the sa…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos