Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Original Radio from a New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

Is the radio in your Volkswagen New Beetle damaged? Here’s how to remove it from the central dashboard. Insert the release keys into the slots on the plastic trim of the stereo (lower part as shown in the video).

Pull the stereo towards you as shown in the video, carefully extracting the radio while being mindful of the various wiring (disconnect the power connectors and the antenna cable). Connect the power connectors to the new radio, insert it into the central dashboard (use the supplied adapter if it’s a generic brand).

Secure the radio; turn it on and test its operation.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Remove the Radio on a VW New Beetle
How to Remove the Radio on a VW New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Want to remove the radio from a New Beetle? Let's see how to take out the radio from the dashboard of the New Beetle. Turn off the radio, then use th…
How to Remove the Radio from the VW New Beetle
How to Remove the Radio from the VW New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To remove the original radio, you first need the specific extraction keys. These are essentially very thin metal bars with a bevel at the end. Once i…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To remove the original car radio, you first need the appropriate release keys. At the lower ends of the car radio, there are two small slots where th…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos