Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Light in the 2018 Volkswagen Caddy?

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Resetting the AdBlue light in the 2018 Volkswagen Caddy does not involve complex procedures or the use of diagnostic equipment connected to the vehicle's control unit. When you notice the active light and the accompanying message on the instrument panel, as shown in this video, simply top up the correct amount of the additive, start the engine, and use the vehicle for a few minutes.

The light and message will automatically reset without any additional action required. Be sure to pay attention to the percentage of Urea in the additive; if it is too low, it may not be detected.


Posted on 2 April 2026 by ScegliAuto


Related tutorials

How to Top Up AdBlue and Reset the Warning Light on a Volkswagen Caddy
How to Top Up AdBlue and Reset the Warning Light on a Volkswagen Caddy
Volkswagen Caddy (2003-2020 / 2K, MK 3) In this guide, we will provide instructions to top up the AdBlue liquid and then reset the warning light on the Volkswagen Caddy. First, get inside t…
Resetting the AdBlue Refill Warning Light on the Volkswagen Caddy
Resetting the AdBlue Refill Warning Light on the Volkswagen Caddy
Volkswagen Caddy (2003-2020 / 2K, MK 3) Below are the main instructions that will allow you to reset the AdBlue refill warning light on the Volkswagen Caddy. First, get inside the vehicle a…
How to Reset the AdBlue Refill Warning on the Volkswagen Caddy
How to Reset the AdBlue Refill Warning on the Volkswagen Caddy
Volkswagen Caddy (2003-2020 / 2K, MK 3) Today's main instructions will show you how to reset the AdBlue refill warning on the Volkswagen Caddy. To perform the reset, you must first refill t…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos