Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate and Deactivate the Alarm or Immobiliser on the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

This guide provides instructions on how to activate the alarm or immobiliser system on the Volkswagen Polo. To activate this system, you will need a specific programming tool to connect to the OBD port of the control unit; in this case, the VCDS software is used, as shown in the video.

The guided procedure for activating the alarm and immobiliser system is then demonstrated, assuming the sensors are already installed in the vehicle; finally, disconnect the tool and check the operation of the immobiliser system.


Posted on 24 May 2026 by ScegliAuto


Related tutorials

How to Activate or Deactivate Lane Assist on a Volkswagen Polo
How to Activate or Deactivate Lane Assist on a Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this brief and simple video tutorial, follow the necessary steps to activate or deactivate Lane Assist on a sixth-generation Volkswagen Polo, appl…
How to Activate or Deactivate the Front Assist on a Volkswagen Polo
How to Activate or Deactivate the Front Assist on a Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Today, you will see the instructions that will allow you to activate and deactivate the front assist system on a Volkswagen Polo, in simple steps. Fi…
How to Disable the Alarm System on Volkswagen Polo
How to Disable the Alarm System on Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this short guide, we’ll see the instructions to enable and disable the alarm system on the Volkswagen Polo in simple steps. First, open the driver…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos