|
Do it yourself
| |||
| ||||
How to Replace the Starter Motor on a Volkswagen Transporter T5
Model: Volkswagen Transporter
T5, MK 5
- Years:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
To replace the starter motor on a Volkswagen Transporter T5, first obtain a new part from eBay using the code 168484704244 at a price of £69.36, with free delivery. First, disconnect the battery for safety. The starter motor is located on the left side of the engine, beneath the intake manifold. To access it, remove the lower cover and, if necessary, the intercooler pipe. The motor is secured with two bolts: one upper (accessible from above after removing the cover) and one lower (from underneath). Use a 13 mm socket and an extension. Disconnect the electrical connector (by pressing the latch) and the red power cable. Before inserting the new starter motor, ensure the replacement number is correct (for 2.0 TDI). Install the new motor, starting with the upper bolt, then the lower one. Reconnect the connector and the red cable, ensuring it clicks into place. Tighten the bolts, remount the covers, and reconnect the battery. Start the engine to verify.
Posted on 8 July 2026 by ScegliAuto
Related tutorials
Volkswagen Transporter
(1979-1990 /
MK 3, T3, T25)
Today's main instructions will show us how to disassemble and replace the starter motor of the Volkswagen Transporter. First, we need to raise the ve…
Volkswagen Transporter
(1979-1990 /
MK 3, T3, T25)
In this tutorial, you will learn how to replace the ignition cylinder in a Volkswagen Transporter T3 van. First, disconnect the negative terminal of …
Volkswagen Transporter
(2014-2025 /
T6, MK 6)
To remove the radio from the Volkswagen Transporter T6, simply follow the instructions in the video and those outlined here. 1) Ensure you have all t…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.062
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |