Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb in a Volkswagen Passat CC

Model: Volkswagen Passat Cc MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

Video tutorial

Here are the instructions to remove and replace the dipped beam bulb in the front headlight of a Volkswagen Passat CC. First, open the engine cover of the vehicle and begin by removing the plastic protection cap of the bulbs; then disconnect the bulb holder for the dipped beam by releasing the metal clip, as shown in the video.

At this point, replace and install the new headlight bulb of the correct type and with the same fitting; check the operation of the bulb, and finally secure the plastic cap.


Posted on 30 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on a Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Learn how to replace the headlight bulbs on a Volkswagen Passat CC: open the bonnet by pulling the lever located at the bottom right of the dashboard…
How to Replace the Headlight Bulb on a Volkswagen Passat CC
How to Replace the Headlight Bulb on a Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Before starting, open the front bonnet of your Volkswagen Passat CC. Begin by unclipping and removing the rear cover of the blown bulb. Next, disconn…
How to Replace the Front Headlight Bulb on a Volkswagen Passat CC?
How to Replace the Front Headlight Bulb on a Volkswagen Passat CC?
Volkswagen Passat Cc (2008-2018 / MK 1) To replace the front headlight bulb on a Volkswagen Passat CC, open the bonnet to access the components in the engine bay: here you will find the int…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos