Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

Let’s see the removal of the water pump on a Volkswagen Golf? Lift the bonnet and secure it, then, using a screwdriver, unscrew the locking pins of the ventilation pipe, and remove the engine soundproofing panel. Start removing the fastening pins of the water pump (first remove the auxiliary belts).

Once the part is removed from its seat, replace the pump. Begin installing the new water pump by tightening it in its housing along with the belts.

Reassemble all previously removed parts in the engine bay. Always check for correct installation.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Below is the guide showing the procedure for removing and replacing the water pump on a Volkswagen Golf 1.4 TSI. First, open the bonnet of the vehicl…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Replace the water pump on a Volkswagen Tiguan with a 1.4 TSI engine. Accessing the TSI engine is not easy; there is very little space, but you can do…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's guide will illustrate the main steps on how to remove and replace the water pump on the Volkswagen Golf 1.4 TSI. First, open the vehicle's bo…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos