Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the wheel of a Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Wheel
Operation: How to remove the wheel of a Vw Polo

Let's see how to remove the damaged wheel on a Vw Polo. We open the luggage compartment and take the wheel removal kit which includes: jack, jack lever, screwdriver, bolt wrench, telescopic wrench, spare wheel. We position the jack under the point of the car frame, lift the car a little and loosen the wheel pins. Now we lift the car with the jack lever, unscrew the pins and pull the wheel away from the hub seat. We mount the new rim on the hub (the spare wheel is positioned under the car body, bring it to the ground with the handy kit placed in the luggage compartment) with the respective pins. Always remember to store the assembly kit with all its parts in the luggage compartment.


Posted on 27 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - Where is the spare wheel of the Volkswagen Polo 4? Read Answer
    • Polo 2017-2025 - Where is the spare wheel on my Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos