Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Window Switch Panel on a VW Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Power window switch

See other generations:
Video tutorial

How to remove the window switch panel located in the door panel of a Volkswagen Golf 4? This video explains the process. Before starting the disassembly, disconnect the battery terminals located in the engine compartment.

Use a screwdriver to pry under the switch panel of the door. Once the plastic is removed (as shown in the video), pry it out from the door panel.

Finally, disconnect the power cables using a screwdriver. Replace the switch panel and reassemble everything.

Snap the plastics of the switch panel back into the panel.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Replace the Window Switch on a Volkswagen Golf
How to Replace the Window Switch on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Before you start, open the front door of your Volkswagen Golf. Begin by prising out and removing the door switch panel using thin but sturdy tools. N…
Replacing Window Regulator Motor on Volkswagen Golf MK3
Replacing Window Regulator Motor on Volkswagen Golf MK3
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) This video shows the main steps to remove and replace the window regulator motor on a Volkswagen Golf Mk3. First, open the front door and remove the …
Removing the Window Switch Panel from the Volkswagen Golf
Removing the Window Switch Panel from the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, you will see in this video tutorial how to remove and replace the window switch panel of the Volkswagen Golf by following these simple and qui…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos