Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : Removing the Volkswagen Golf door panel 5

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years 2003-2008
Part: Door panel
Operation: Removing the Volkswagen Golf door panel 5

In this video we will see how to remove the outer door panel of a Vokswagen Golf mk5. Open the door and unscrew all the screws on the door body, located on the frames: you will need a screwdriver with a torx key. Then proceed with the disassembly of the external handle for opening: lever with a screwdriver to access the two screws; unscrew the latter and remove the steel wire that is used to open the handle: at this point, proceed by pulling the door panel outwards in order to have access to the interior and the window lifter.


Posted on 5 December 2023 by ScegliAuto



How to remove the door panel of a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf VI, Golf 6, MK 6, 5K1) Before we can start, we will have to go and open the door of our Volkswagen golf. So let's start by disengaging and removing the door panel inserts w
Removing the Volkswagen Golf door panel
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In today's video tutorial we will see how to remove the Volkswagen Golf front door panel, following the instructions below. First we open the front d
How to dismantle the door panel of the Volkswagen Golf.
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today we will see the step-by-step instructions that will allow us to disassemble and replace the front door panel of the Volkswagen Golf. First, we

Other guides that may interest you

    Frequently Asked Questions

    • Golf 2012-2019 - How to disassemble the door panels in Volkswagen Golf 7? Read Answer
    • Golf 1997-2003 - How much does the door panel of the Vw Golf 4 cost? Read Answer

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos