Do it yourself
Frequently asked questions about cars and motorcycles

Remove the Imperial Panel of the Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

Remove the trim plastics beneath the panel to begin. Remove the side handles of the headlining with a screwdriver, then remove the sun visors and the overhead lighting unit positioned in the panel. Once everything is removed, detach the headlining panel around the perimeter of the car's roof. When the panel is free from clips, you can pull it out of the vehicle. Be careful when pulling it out as it may break. Reupholster the headlining panel or replace it with a new one.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video, learn how to enable the full FIS menu on the Volkswagen Golf V. Turn on the ignition and press the button located on the outer part of…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Is the roof covering panel damaged? Here’s how to remove the panel on a Golf 4. Remove the side handles of the panel with a screwdriver, then take of…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To remove the door panel of the Volkswagen Golf 4, pry at the area of the window switch panel to extract it from its housing and disconnect the under…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos